Novus USB-i485 - 8816001039

The USB-i485 module is a cost-effective way to convert RS485 or RS422 industrial buses to a USB interface. When connected to a PC USB port the USB-i485 module is automatically detected and is installed as a native COM port that is compatible with any existing serial communication application.

Multiple modules can be installed when using USB hubs thus allowing a hassle-free configuration of a multi serial system without any IRQ or DMA configuration. 1500 Vdc galvanic isolation between the USB port and RS485/RS422 protects the PC from spikes or possible misconnections in the communication bus.

Features:

• Computer interface: USB V1.1 Plug and Play
• Operational system virtual serial port driver
• Supports Windows 10/7/Vista/XP/2008Server/2003Server/98/ME/2000/CE, MAC and Linux 2.4.20 or above. 64-bit options for latest operating systems
• Field Interfaces: RS485 Half-Duplex (dual buses), RS485 Full Duplex or RS422
• Jumper selected RS485 / RS422
• Automatic flow control for RS485 Half Duplex 120 Ohms internal resistors termination enabled by jumpers
• Transmission rate: from 300 bps to 250 kbps
• MaximumRS485/RS422 cable length: 1200 m
• Maximum number of devices in the RS485 network
• Half Duplex: 2 x 32 devices
• Full Duplex: 32 devices
• Data transmission and reception LED indicators
• Power: from the USB port
• Consumption: <100 mA
• Isolation: 1500 Vdc from USB interface and the RS485/RS422 interfaceRS485/422 bus protection: ±60 Vdc, 15 kV ESD
• USB connection: Mini-B connector A 1.5 m cable with plugs mini-B and A is provided with the module
• RS485/422 connector: screw terminal type accepting 1.5 mm² (16 AWG) wires ABS enclosure: 70 x 60 x 18 mm
• Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing
• Base Unit of Measure: Each